ALLPOWERS Dual USB 20A Solar Charge Controller 12V/24V

Change the default setting of solar controller, requires:
1. Disconnect the solar panel
2. ensure the remain voltage of battery no less than 12V

Note:
<1>Please keep... read more

Average Customer Rating

   out of 5
Bookmark and Share

Product Features

  • ❶ Rated Discharge Current: 20A; USB Output Voltage: 5V/3A; Battery Voltage: 12V/24V auto. Adjustable power rate with dual USB ports; 3-Stage(Bulk, ABS, Float) charge management and 4-Stage PWM charge
  • ❷ Functionality: Equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management
  • ❸ Mutiple Electric Protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection
  • ❹ Good Heat Dissipation: Dual mosfet reverse current protection, low heat production(ALL electronic components generate heat when they are running,it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place)
  • ❺ Easy to Use: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc

Product Description

Change the default setting of solar controller, requires:
1. Disconnect the solar panel
2. ensure the remain voltage of battery no less than 12V

Note:
<1>Please keep it in cool and well ventilated place to maintain good heat dissipation
<2>the regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries.
<3>Make sure your battery has enough voltage for the controller to recognize the battery before first installation.
<4>Indoor use only: the working temperature of this controller is -35°C to +60°C, during hot sunny days, the temperature outside might go up to 60-75°C. Please do keep the controller stay in cool and well-ventilated place to maintain good heat dissipation. <5>When the battery voltage is too low, the controller will stop output(≦ 8V, controller turn off itself, LCD is blank,≦ 10.7V, 12Voutput ports are not available); after the solar panels charging, the battery will return to 12.6 V. It is a natural to output.

Warm Tips:
Only voltage reading in the screen of the solar controller, no amps or amp hours.

Specification:
*Voltage: DC 12V/24V
*Self-consuming: 10mA
*Rated Charge Current: 20A
*Rated Load Current: 20A
*Over Charge Protection: 14.4V/28.8V
*Over Charge Floating Charge: 13.7V/27.4V
*Charge Recover Voltage: 12.6V/25.2V
*Over Discharge Protection: 10.7V/21.4V
*Over Discharge Recover: 12.6V/25.2V
*USB Output: 5V/3A
*Operating Temperature: -35℃-60℃
*Size:150 * 78 * 35mm / 5.9 * 3 * 1.4in

Warm Tips: Wire Range 26-10 AWG(4.0mm²)
....read more

Product Details?

Have A Question?

Are you looking for something but can not find it, or have a question for us? We would love to help you. Just fill out the form below and we will get back to you as soon as possible.